Using and operating a chainsaw is dangerous and strenuous. You must not be unaware of the fact that chainsaw is a powerful tool. It has led a number of people to the deathbed. No matter how professional you are, you always need to take up some safety precautions before and while using your chainsaw. It is important to learn handy techniques for safe operation and cutting jobs.
Regardless of the task you are using your chainsaw for, it is advisable to go through the following steps for easy and safe use:
- 1 1. Read the user manual carefully
- 2 2. Select the chainsaw according to your job requirements
- 3 3. Prepare the surrounding area before using the chainsaw
- 4 4. Decide the job you are going to perform
- 5 5. Double-check your chainsaw before use
- 6 6. Fill the fuel and oil correctly
- 7 7. Turn your chainsaw on safely
- 8 8. Start on a practicing piece of wood
- 9 9. Keep additional tools along
- 10 10. Let the chainsaw cool before storing
- 11 Conclusion
1. Read the user manual carefully
Each chainsaw comes with its own user manual. You are guided on how to use your chainsaw and how to prepare it properly. Read all the safety precautions and instructions. Keep them in mind in case your chainsaw responds unusually.
2. Select the chainsaw according to your job requirements
A number of different kinds of chainsaw are available on the market. It is more important to choose the right chainsaw instead of best chainsaw. The best chainsaw on the list might not be the best for you.
Beginners must go for a light-duty chainsaw as they are still learning and practicing their skills. Choose an average-sized chainsaw to handle and operate it safely.
If you are a professional, make sure you are not doing heavy-duty cutting jobs with a small chainsaw. Having the right bar length and enough power supply is highly important.
Go through a buying guide before getting yourself a chainsaw. It will let you know all the important factors to be included in the chainsaw that suits best to your needs and requirements.
3. Prepare the surrounding area before using the chainsaw
You must look at the area where you are going to work with your chainsaw. Make sure you have had a look at overhead power lines, buildings, cars, and people in the surrounding area. You need to clear the area before working with your chainsaw.
Any of these obstacles can result in great danger.
If you are going to cut down a tree with your chainsaw, you need to prepare the surrounding. Decide the direction of fall. There should be nothing prone to danger in the decided area. The ground should be clean and clear.
4. Decide the job you are going to perform
A chainsaw allows you to do different jobs. Each of them comes with a different way of using and operating your chainsaw. Using your chainsaw in a wrong manner cannot only mess up your job but is capable of harming you as well.
So before you use your chainsaw, decide the job you are going t perform with it. The three major jobs you can do are:
- Felling: This is when you want to cut down a tall standing or a hanging tree.
- Limbing: This is pruning limbs and branches from the tree. This can be done on a standing tree as well as after you cut the tree.
- Bucking: This is cutting the wooden log into pieces of the size you require.
While you are felling the tree, you need to know how to cut down a tree with a chainsaw safely. Keep all the angles and positions in mind to do the job without any danger.
5. Double-check your chainsaw before use
Once you choose your chainsaw and know your job well, it is time to prepare and double-check your chainsaw. Before you start your chainsaw, check if the chain is on properly. The tension should be adjusted appropriately. The chain brake must be removed as the chainsaw cannot rotate if the chain brake is engaged
Also, the air filter should be properly installed. Double-check to ensure that faceplate and bar nuts are fixed rightly.
6. Fill the fuel and oil correctly
In case you are using a gas chainsaw, you need to fill the gas tank with the correct mixture of fuel and oil. Fill it in the right ratio or else, the chainsaw can stop operating during the use. Gas chainsaws do not come lubricating oil supply. If the right ratio is not used, your chainsaw tends to burn up quickly, leading to a hazardous situation.
In the case of corded electric chainsaws, the power supply must match the voltage your chainsaw require. Also, make sure the cord is lengthy enough and is properly covered. If you are using a battery-powered chainsaw, it must be fully charged to get enough cuts.
7. Turn your chainsaw on safely
When it is time to turn on your chainsaw, stay cautious!
Chainsaws start in various ways. Some of them come with electric start while others have a starter rope. Electric starts are easy and require no hassle.
However, in case of starter rope, you need to pull it sharply until the engine fires. At times, the engine fires but does not start. In this case, push the choke in halfway and try once more. Usually, it takes 4 to 5 pulls to get the saw running if your chainsaw is well-tuned.
If it takes time to start the chainsaw, you need to check the air filter, level of a lubricator, your carburetor for proper fuel and oil. Also, have a look at the power source in case of electric chainsaws.
8. Start on a practicing piece of wood
Every time you use your chainsaw, practice on a piece of wood first. Never forget to keep an additional wooden piece with you. This helps you know if your chain cutters are aligned well and the saw is working efficiently.
You would not like your chainsaw throbbing high on the tree. If not functioning properly, the bar can just stuck in the wood and is difficult to remove then.
When you choose the place to make cuts, the blade must be in line with the cut. Then, disengage the chain brake. The throttle should be fully open. Lay the blade against the wood to allow it to cut through. Make sure you are not forcing the blade into the wood. It does no benefit.
Apply moderate pressure and let the tool does it job. You only need to ease the throttle off if you are done with this cut and need to move on the other side of the log.
9. Keep additional tools along
In case the bar is stuck into the wood, you need to stay prepared for this binding situation. Keep some additional tools with you such as a hammer, a wedge, or an axe. This helps to free your tool if the limb you are cutting wedges your bar.
10. Let the chainsaw cool before storing
Before you store your chainsaw, let it cool. If you are not going to use it for a long time, it is advised to empty all the fuel. This helps you to do minimal maintenance and keeps your chainsaw in a good condition.
Remember that better the situation your chainsaw is in, safer you can operate it.
Using and operating a chainsaw safely is not something you should be afraid of. It just takes a little practice. If you keep the above-mentioned safety precautions and techniques in mind, you are never going to harm yourself or anyone with the chainsaw.